[PATCH 1/3] serial: 8250: Discard RTS/DTS setting from clock update method
From: Serge Semin <hidden>
Date: 2020-09-23 16:19:58
Also in:
linux-serial, lkml
Subsystem:
8250/16?50 (and clone uarts) serial driver, the rest, tty layer and serial drivers · Maintainers:
Greg Kroah-Hartman, Linus Torvalds, Jiri Slaby
It has been a mistake to add the MCR register RTS/DTS fields setting in
the generic method of the UART reference clock update. There is no point
in asserting these lines at that procedure. Just discard the
serial8250_out_MCR() mathod invocation from there then.
Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method")
Signed-off-by: Serge Semin <redacted>
---
drivers/tty/serial/8250/8250_port.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index c71d647eb87a..1259fb6b66b3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c@@ -2665,7 +2665,6 @@ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); - serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); spin_unlock_irqrestore(&port->lock, flags); serial8250_rpm_put(up);
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel