[PATCH v3 06/15] arm64: dts: ti: align GPIO hog names with dtschema
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-09-16 16:37:25
Also in:
linux-aspeed, linux-devicetree, linux-gpio, linux-mediatek, linux-omap, linux-renesas-soc, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 648267284582..456e7818b521 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts@@ -407,7 +407,7 @@ gpio-controller; #gpio-cells = <2>; - p09 { + p09-hog { /* P11 - MCASP/TRACE_MUX_S0 */ gpio-hog; gpios = <9 GPIO_ACTIVE_HIGH>;
@@ -415,7 +415,7 @@ line-name = "MCASP/TRACE_MUX_S0"; }; - p10 { + p10-hog { /* P12 - MCASP/TRACE_MUX_S1 */ gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel