Thread (38 messages) 38 messages, 8 authors, 2020-09-21

Re: [PATCH v2 12/15] ARM: dts: aspeed: align GPIO hog names with dtschema

From: Joel Stanley <joel@jms.id.au>
Date: 2020-09-11 00:58:23
Also in: linux-aspeed, linux-devicetree, linux-mediatek, linux-omap, linux-renesas-soc, lkml

On Thu, 10 Sep 2020 at 17:59, Krzysztof Kozlowski [off-list ref] wrote:
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
This is a bit ugly. Do we have to go down this path?

quoted hunk ↗ jump to hunk
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts |  2 +-
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts  | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 1fa233d2da26..0aa437486a0d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -560,7 +560,7 @@
                gpio-controller;
                #gpio-cells = <2>;

-               smbus0 {
+               smbus0-hog {
                        gpio-hog;
                        gpios = <4 GPIO_ACTIVE_HIGH>;
                        output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index cb85168f6761..577c211c469e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -827,7 +827,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus0 {
+                               smbus0-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -852,7 +852,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus1 {
+                               smbus1-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -900,7 +900,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus2 {
+                               smbus2-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -925,7 +925,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus3 {
+                               smbus3-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -992,7 +992,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus4 {
+                               smbus4-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -1017,7 +1017,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus5 {
+                               smbus5-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -1065,7 +1065,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus6 {
+                               smbus6-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
@@ -1090,7 +1090,7 @@
                                gpio-controller;
                                #gpio-cells = <2>;

-                               smbus7 {
+                               smbus7-hog {
                                        gpio-hog;
                                        gpios = <4 GPIO_ACTIVE_HIGH>;
                                        output-high;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help