[PATCH 1/3] pinctrl: mvebu: Fix i2c sda definition for 98DX3236
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: 2020-09-07 02:42:20
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, pin control subsystem, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Walleij, Linus Torvalds
Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
the board tested 0x4 resulted in a non-functioning i2c bus so stick with
0x1 which works.
Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
index a767a05fa3a0..48e2a6c56a83 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c@@ -414,7 +414,7 @@ static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = { MPP_VAR_FUNCTION(0x1, "i2c0", "sck", V_98DX3236_PLUS)), MPP_MODE(15, MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS), - MPP_VAR_FUNCTION(0x4, "i2c0", "sda", V_98DX3236_PLUS)), + MPP_VAR_FUNCTION(0x1, "i2c0", "sda", V_98DX3236_PLUS)), MPP_MODE(16, MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS), MPP_VAR_FUNCTION(0x4, "dev", "oe", V_98DX3236_PLUS)),
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel