The input clock and number of clock provider cells are not required for
the PMIC to operate.  They are needed only for the optional bd718x7
clock driver.

Add also clock-output-names as driver takes use of it.

This fixes dtbs_check warnings like:

    arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml: pmic@4b: 'clocks' is a required property
    arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml: pmic@4b: '#clock-cells' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Matti Vaittinen <redacted>
---
 .../devicetree/bindings/mfd/rohm,bd71847-pmic.yaml       | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
index 77bcca2d414f..5d531051a153 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml

@@ -38,6 +38,9 @@ properties:
   "#clock-cells":
     const: 0
 
+  clock-output-names:
+    maxItems: 1
+
 # The BD71847 abd BD71850 support two different HW states as reset target
 # states. States are called as SNVS and READY. At READY state all the PMIC
 # power outputs go down and OTP is reload. At the SNVS state all other logic

@@ -116,12 +119,14 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
-  - "#clock-cells"
   - regulators
 
 additionalProperties: false
 
+dependencies:
+  '#clock-cells': [clocks]
+  clocks: ['#clock-cells']
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel