[PATCH 4/9] i2c: cadence: Simplify with dev_err_probe()
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-09-02 15:08:17
Also in:
linux-i2c, linux-rockchip, lkml
Subsystem:
arm/zynq architecture, i2c subsystem, i2c subsystem host drivers, the rest · Maintainers:
Michal Simek, Andi Shyti, Linus Torvalds
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/i2c/busses/i2c-cadence.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index e4b7f2a951ad..eefde554c50c 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c@@ -1214,11 +1214,10 @@ static int cdns_i2c_probe(struct platform_device *pdev) "Cadence I2C at %08lx", (unsigned long)r_mem->start); id->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(id->clk)) { - if (PTR_ERR(id->clk) != -EPROBE_DEFER) - dev_err(&pdev->dev, "input clock not found.\n"); - return PTR_ERR(id->clk); - } + if (IS_ERR(id->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(id->clk), + "input clock not found.\n"); + ret = clk_prepare_enable(id->clk); if (ret) dev_err(&pdev->dev, "Unable to enable clock.\n");
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel