Re: [PATCH v2 1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: 2020-08-17 19:36:15
Also in:
linux-amlogic, linux-devicetree
Hi Anand, thank you for updating this patch! On Mon, Aug 17, 2020 at 12:21 PM Anand Moon [off-list ref] wrote: [...]
changes v2 --Fix the missing INT (GPIOA.BIT7) pinctrl.
should I also expect an interrupt property somewhere below?
quoted hunk ↗ jump to hunk
--Fix the missing rtcwakeup. --Drop the clock not required clock property by the PCF8563 driver. --- .../arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 34fffa6d859d..f08ae1b337ad 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts@@ -477,6 +477,19 @@ hdmi_tx_tmds_out: endpoint { }; }; +&i2c3 { + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-1 = <&tdm_c_din3_a_pins>; + pinctrl-names = "default";
why is there pinctrl-1 without any corresponding "pinctrl-names" entry? also I'm surprised to see a TDM (audio) related pin function as part of an I2C controller. if this is correct then I'd appreciate a bit information (for example as part of the patch description) why that is Martin _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel