Thread (13 messages) 13 messages, 4 authors, 2020-09-14

Re: [RFT 2/4] ARM: dts: exynos: Move fixed clocks under root node in Exynos3250

From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: 2020-08-31 11:29:40
Also in: dri-devel, linux-devicetree, linux-samsung-soc, lkml

On 29.08.2020 19:25, Krzysztof Kozlowski wrote:
The fixed clocks are kept under dedicated node fixed-rate-clocks, thus a
fake "reg" was added.  This is not correct with dtschema as fixed-clock
binding does not have a "reg" property:

   arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
quoted hunk ↗ jump to hunk
---
  arch/arm/boot/dts/exynos3250.dtsi | 42 +++++++++++++------------------
  1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index d3fb45a56527..c67c70e46794 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,33 +97,25 @@
  		};
  	};
  
-	fixed-rate-clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		xusbxti: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "xusbxti";
-		};
+	xusbxti: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xusbxti";
+	};
  
-		xxti: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "xxti";
-		};
+	xxti: clock-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xxti";
+	};
  
-		xtcxo: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "xtcxo";
-		};
+	xtcxo: clock-2 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xtcxo";
  	};
  
  	pmu {
Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help