This series adds support for the camera sensor OV8865.
The sensor was tested on a dual camera module for A83T SoC on Bananapi M3.
My work is based on the Allwinner BSP for the A83T.

Changes since V1:
- Replaced the text documentation by a YAML schema.
- Add some correction in the enable of the sensor.

Kévin L'hôpital (3):
  dt-bindings: media: i2c: Add documentation for ov8865
  media: i2c: Add support for the OV8865 image sensor
  [NOT FOR MERGE] ARM: dts: sun8i: a83t: bananapi-m3: Enable OV8865
    camera

 .../devicetree/bindings/media/i2c/ov8865.yaml |  165 ++
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts  |   89 +
 drivers/media/i2c/Kconfig                     |   12 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/ov8865.c                    | 2541 +++++++++++++++++
 5 files changed, 2808 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8865.yaml
 create mode 100644 drivers/media/i2c/ov8865.c

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel