[PATCH] dmaengine: pl330: Fix burst length if burst size is smaller than bus width
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: 2020-08-25 06:46:29
Also in:
dmaengine, lkml
Subsystem:
dma generic offload engine subsystem, the rest · Maintainers:
Vinod Koul, Linus Torvalds
Move the burst len fixup after setting the generic value for it. This
finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine:
pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was
overwritten by the generic value.
Reported-by: kernel test robot <redacted>
Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/dma/pl330.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 2c508ee672b9..e010064d8846 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c@@ -2801,6 +2801,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, while (burst != (1 << desc->rqcfg.brst_size)) desc->rqcfg.brst_size++; + desc->rqcfg.brst_len = get_burst_len(desc, len); /* * If burst size is smaller than bus width then make sure we only * transfer one at a time to avoid a burst stradling an MFIFO entry.
@@ -2808,7 +2809,6 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width) desc->rqcfg.brst_len = 1; - desc->rqcfg.brst_len = get_burst_len(desc, len); desc->bytes_requested = len; desc->txd.flags = flags;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel