[PATCH v11 10/11] PCI: brcmstb: Set bus max burst size by chip type
From: Jim Quinlan <hidden>
Date: 2020-08-24 19:31:26
Also in:
linux-pci, lkml
Subsystem:
broadcom bcm2711/bcm2835 arm architecture, broadcom bcm7xxx arm architecture, broadcom stb pcie driver, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Florian Fainelli, Jim Quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
From: Jim Quinlan <redacted>
The proper value of the parameter SCB_MAX_BURST_SIZE varies per chip. The
2711 family requires 128B whereas other devices can employ 512. The
assignment is complicated by the fact that the values for this two-bit
field have different meanings;
Value Type_Generic Type_7278
00 Reserved 128B
01 128B 256B
10 256B 512B
11 512B Reserved
Signed-off-by: Jim Quinlan <redacted>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 61c1be766522..0d8234da519c 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c@@ -55,7 +55,7 @@ #define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000 #define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000 #define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000 -#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128 0x0 + #define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000 #define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x07c00000 #define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x0000001f
@@ -846,7 +846,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) int num_out_wins = 0; u16 nlw, cls, lnksta; int i, ret, memc; - u32 tmp, aspm_support; + u32 tmp, burst, aspm_support; /* Reset the bridge */ brcm_pcie_bridge_sw_init_set(pcie, 1);
@@ -866,11 +866,22 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) /* Wait for SerDes to be stable */ usleep_range(100, 200); + /* + * SCB_MAX_BURST_SIZE is a two bit field. For GENERIC chips it + * is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it + * is encoded as 0=Rsvd, 1=128, 2=256, 3=512. + */ + if (pcie->type == BCM2711) + burst = 0x0; /* 128B */ + else if (pcie->type == BCM7278) + burst = 0x3; /* 512 bytes */ + else + burst = 0x2; /* 512 bytes */ + /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK); u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK); - u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128, - PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); + u32p_replace_bits(&tmp, burst, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); writel(tmp, base + PCIE_MISC_MISC_CTRL); ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size,
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel