[PATCH 18/22] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-08-23 16:17:58
Also in:
linux-devicetree, linux-gpio, linux-mmc, linux-pm, linux-pwm, linux-serial, linux-watchdog, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
According to device tree specification, device node names should be somewhat generic and reflecting the function of the device so add the "hog" suffixes to all GPIO hog nodes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0d1088dcaa02..fa7a041ffcfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi@@ -229,28 +229,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3_hog>; - usb-emulation { + usb-emulation-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_HIGH>; output-low; line-name = "usb-emulation"; }; - usb-mode1 { + usb-mode1-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb-mode1"; }; - usb-pwr { + usb-pwr-hog { gpio-hog; gpios = <12 GPIO_ACTIVE_LOW>; output-high; line-name = "usb-pwr-ctrl-en-n"; }; - usb-mode2 { + usb-mode2-hog { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; output-high;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel