Re: [PATCH v2 2/4] usb: dwc3: of-simple: Add compatible for rk3328
From: Robin Murphy <robin.murphy@arm.com>
Date: 2020-08-18 14:53:42
Also in:
linux-devicetree, linux-rockchip, linux-usb, lkml
On 2020-08-17 04:11, travelvia@airmail.cc wrote:
quoted hunk ↗ jump to hunk
From: Cameron Nemo <redacted> Add a compatible to be hooked into by the Rockchip rk3328 device tree. The rk3399 compatible cannot be reused because the rk3328 SoCs may require a specialized driver in the future, and old device trees must remain compatible with newer kernels. Signed-off-by: Cameron Nemo <redacted> --- drivers/usb/dwc3/dwc3-of-simple.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 7df115012935..68d6e4fa0c6a 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c@@ -49,7 +49,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) * Some controllers need to toggle the usb3-otg reset before trying to * initialize the PHY, otherwise the PHY times out. */ - if (of_device_is_compatible(np, "rockchip,rk3399-dwc3")) + if (of_device_is_compatible(np, "rockchip,rk3328-dwc3") ||
Is this necessary? Even downstream there's no reset control in the DT, so I can't see that it achieves anything. Robin.
quoted hunk ↗ jump to hunk
+ of_device_is_compatible(np, "rockchip,rk3399-dwc3")) simple->need_reset = true; simple->resets = of_reset_control_array_get(np, false, true,@@ -171,6 +172,7 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { }; static const struct of_device_id of_dwc3_simple_match[] = { + { .compatible = "rockchip,rk3328-dwc3" }, { .compatible = "rockchip,rk3399-dwc3" }, { .compatible = "xlnx,zynqmp-dwc3" }, { .compatible = "cavium,octeon-7130-usb-uctl" },
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel