[PATCH v33 6/6] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
From: Dan Murphy <hidden>
Date: 2020-08-12 19:51:15
Also in:
linux-devicetree, linux-leds, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy <redacted> CC: Linus Walleij <redacted> Acked-by: Pavel Machek <redacted> --- arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 33e3b0b3c53d..ff47cbf6ed3b 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi@@ -58,16 +58,21 @@ lp5521@33 { reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; };
@@ -77,15 +82,20 @@ lp5521@34 { reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; };
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel