RE: [RFT PATCH v5] serial: samsung: Removes the IRQ not found warning
From: "Alim Akhtar" <alim.akhtar@samsung.com>
Date: 2020-08-10 16:27:03
Also in:
linux-samsung-soc, linux-serial, lkml
Hi Tamseel,
-----Original Message----- From: Tamseel Shams <redacted> Sent: 10 August 2020 08:30 To: kgene@kernel.org; krzk@kernel.org; gregkh@linuxfoundation.org; jslaby@suse.com Cc: linux-arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org; linux-serial@vger.kernel.org; linux-kernel@vger.kernel.org; alim.akhtar@samsung.com; Tamseel Shams [off-list ref] Subject: [RFT PATCH v5] serial: samsung: Removes the IRQ not found warning In few older Samsung SoCs like s3c2410, s3c2412 and s3c2440, UART IP is having 2 interrupt lines. However, in other SoCs like s3c6400, s5pv210, exynos5433, and exynos4210 UART is having only 1 interrupt line. Due to this, "platform_get_irq(platdev, 1)" call in the driver gives the following false-positive error: "IRQ index 1 not found" on newer SoC's. This patch adds the condition to check for Tx interrupt only for the those SoC's which have 2 interrupt lines. Signed-off-by: Tamseel Shams <redacted> ---
Tested on exynos7 platform, don’t see " IRQ index 1 not found" with this patch applied Fill free to added Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
quoted hunk ↗ jump to hunk
Commit message is changed. Added RFT, for older platform. Addressed Krzysztof's review comments [1] [1] -> https://lkml.org/lkml/2020/7/21/150 drivers/tty/serial/samsung_tty.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 6ef614d8648c..b923683e6a25 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c@@ -1911,9 +1911,11 @@ static int s3c24xx_serial_init_port(structs3c24xx_uart_port *ourport, ourport->tx_irq = ret + 1; } - ret = platform_get_irq(platdev, 1); - if (ret > 0) - ourport->tx_irq = ret; + if (!s3c24xx_serial_has_interrupt_mask(port)) { + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; + } /* * DMA is currently supported only on DT platforms, if DMA properties * are specified. -- 2.17.1
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel