[PATCH AUTOSEL 5.8 11/72] arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
From: Sasha Levin <sashal@kernel.org>
Date: 2020-08-08 23:36:04
Also in:
linux-devicetree, linux-rockchip, lkml, stable
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Heiko Stuebner <redacted>
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
gmac fix.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <redacted>
Link: https://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de (local)
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 07694b196fdbe..063f59a420b65 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi@@ -101,7 +101,7 @@ vcc3v3_sys: vcc3v3-sys { vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel