[PATCH v6 6/6] PCI: uniphier: Add error message when failed to get phy
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: 2020-08-07 10:25:46
Also in:
linux-devicetree, linux-pci, lkml
Subsystem:
pci native host bridge and endpoint drivers, pci subsystem, pcie driver for socionext uniphier, the rest · Maintainers:
Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Kunihiko Hayashi, Linus Torvalds
Even if phy driver doesn't probe, the error message can't be distinguished from other errors. This displays error message caused by the phy driver explicitly. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index 93ef608..7c8721e 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c@@ -489,8 +489,12 @@ static int uniphier_pcie_probe(struct platform_device *pdev) return PTR_ERR(priv->rst); priv->phy = devm_phy_optional_get(dev, "pcie-phy"); - if (IS_ERR(priv->phy)) - return PTR_ERR(priv->phy); + if (IS_ERR(priv->phy)) { + ret = PTR_ERR(priv->phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get phy (%d)\n", ret); + return ret; + } platform_set_drvdata(pdev, priv);
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel