[PATCH v5 7/7] arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts
From: <hidden>
Date: 2020-07-19 07:01:41
Also in:
linux-ide
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
From: Sven Auhagen <redacted> There are two SATA ports per CP110. Each of them has a dedicated interrupt. Describe the real hardware by adding two SATA ports to the CP110 SATA node. Signed-off-by: Sven Auhagen <redacted> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 9dcf16beabf5..ec27294f097b 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi@@ -300,11 +300,9 @@ CP11X_LABEL(usb3_1): usb3@510000 { }; CP11X_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; + compatible = "marvell,armada-8k-ahci"; reg = <0x540000 0x30000>; dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP11X_LABEL(clk) 1 15>, <&CP11X_LABEL(clk) 1 16>; #address-cells = <1>;
@@ -312,10 +310,12 @@ CP11X_LABEL(sata0): sata@540000 { status = "disabled"; sata-port@0 { + interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; reg = <0>; }; sata-port@1 { + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; reg = <1>; }; };
--
2.24.3 (Apple Git-128)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel