Re: [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
From: Alexandre Torgue <hidden>
Date: 2020-07-21 12:59:25
Also in:
dri-devel, linux-clk, linux-devicetree, linux-spi, lkml
Possibly related (same subject, not in this thread)
- 2020-05-26 · Re: [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco · Mark Brown <broonie@kernel.org>
- 2020-05-25 · [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco · <hidden>
On 7/21/20 2:55 PM, dillon min wrote:
Hi, Alexandre, On Tue, Jul 21, 2020 at 7:54 PM Alexandre Torgue [off-list ref] wrote:quoted
On 7/21/20 12:39 PM, dillon min wrote:quoted
Hi Alexandre, On Tue, Jul 21, 2020 at 5:19 PM Alexandre Torgue [off-list ref] wrote:quoted
Hi Dillon On 5/25/20 5:40 AM, dillon.minfei@gmail.com wrote:quoted
From: dillon min <redacted> V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX' for SPI_SIMPLEX_RX mode on stm32 spi controller. V5: 1 instead of add send dummy data out under SIMPLEX_RX mode, add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver 2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under 'SPI_3WIRE' modeConcerning DT patches, they look goods for me. However I'll merge them when drivers parts will be merged. regards AlexThis patchset status is : dts: ARM: dts: stm32: Add dma config for spi5 ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board panel-bindings: Reviewed-by: Rob Herring, need more reviewing to merge dt-bindings: display: panel: Add ilitek ili9341 panel bindings clk: Acked-by: Stephen Boyd , need more reviewing to merge clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused() drm-panel: Reviewed-by: Linus Walleij . need more reviewing to merge drm/panel: Add ilitek ili9341 panel driver spi-driver: Acked-by: Mark Brown ,merged into mainline spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't becoexit with 'SPI_3WIRE' mode For ili9341 drivers, it seems to need more time to review, or might be dropped. since the drm maintainer might create a new interface to support DPI,DBI,DSI in one driver. Currently it's under discussion. I will rework the ili9341 driver after that. But, we can use the existing "drivers/gpu/drm/tiny/ili9341.c" driver to support ili9341 on stm32f429-disco board only using the spi bus. except the display refresh performance is not as good as the ltdc interface. I can submit a new patch just with dts changed this week for it, if you need.Thanks for this status. I'm close to send my PR for v5.9. There is no needs to have an intermediate version (Except you absolutely want it). Thanks alexOk, I prefer to use the ltdc interface to drive ili9341 either.
Ok, so let's wait for the full review of this series. Cheers Alex
Thanks, Dillon.quoted
quoted
Thanks, Dillon.quoted
quoted
V4: According to alexandre torgue's suggestion, combine ili9341 and l3gd20's modification on stm32f429-disco board to one patchset. Changes: ili9341: 1 update ili9341 panel driver according to Linus's suggestion 2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4 3 merge l3gd20's change to this patchset V3: 1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c to support serial spi & parallel rgb interface in one driver. 2 update ilitek,ili9341.yaml dts binding documentation. 3 update stm32f429-disco dts binding V2: 1 verify ilitek,ili9341.yaml with make O=../linux-stm32 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/ ilitek,ili9341.yaml V1: 1 add ili9341 drm panel driver 2 add ltdc, spi5 controller for stm32f429-disco 3 add ltdc, spi5 pin map for stm32f429-disco 4 add docs about ili9341 5 fix ltdc driver loading hang in clk set rate bug L3gd20: V3: 1 merge stm32f429-disco dtbs binding with ili9341 part V2: 1 insert blank line at stm32f420-disco.dts line 143 2 add more description for l3gd20 in commit message V1: 1 enable spi5 controller on stm32f429-disco (dts) 2 add spi5 pinmap for stm32f429-disco (dts) 3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4 dillon min (8): ARM: dts: stm32: Add dma config for spi5 ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board dt-bindings: display: panel: Add ilitek ili9341 panel bindings clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate, fix duplicated ltdc clock register to 'clk_core' case ltdc's clock turn off by clk_disable_unused() drm/panel: Add ilitek ili9341 panel driver spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4 spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode .../bindings/display/panel/ilitek,ili9341.yaml | 69 ++ arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 + arch/arm/boot/dts/stm32f429-disco.dts | 48 + arch/arm/boot/dts/stm32f429.dtsi | 3 + drivers/clk/clk-stm32f4.c | 7 +- drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++ drivers/spi/spi-stm32.c | 19 +- drivers/spi/spi.c | 3 +- 10 files changed, 1521 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel