Re: [PATCH 07/19] clk: at91: sam9x60-pll: use frac when setting frequency
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: 2020-07-17 09:12:44
Also in:
linux-clk, lkml
On 15/07/2020 14:24:15+0300, Claudiu Beznea wrote:
In commit a436c2a447e59 ("clk: at91: add sam9x60 PLL driver")
the fractional part of PLL wasn't set on registers but it was
calculated and taken into account for determining div and mul
(see sam9x60_pll_get_best_div_mul()).I think this becomes an issue only once 4/19 is applied so you should probably squash those two together.
quoted hunk ↗ jump to hunk
Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <redacted> --- drivers/clk/at91/clk-sam9x60-pll.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c index 00f2afd6e9b6..13e15bd48770 100644 --- a/drivers/clk/at91/clk-sam9x60-pll.c +++ b/drivers/clk/at91/clk-sam9x60-pll.c@@ -16,6 +16,7 @@ #define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0) #define PMC_PLL_CTRL1_MUL_MSK GENMASK(31, 24) +#define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0) #define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1) #define UPLL_DIV 2@@ -55,7 +56,7 @@ static int sam9x60_pll_prepare(struct clk_hw *hw) unsigned long flags; u8 div; u16 mul; - u32 val; + u32 val, frac; spin_lock_irqsave(pll->lock, flags); regmap_write(regmap, AT91_PMC_PLL_UPDT, pll->id);@@ -65,9 +66,10 @@ static int sam9x60_pll_prepare(struct clk_hw *hw) regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val); mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val); + frac = FIELD_GET(PMC_PLL_CTRL1_FRACR_MSK, val); if (sam9x60_pll_ready(regmap, pll->id) && - (div == pll->div && mul == pll->mul)) { + (div == pll->div && mul == pll->mul && frac == pll->frac)) { spin_unlock_irqrestore(pll->lock, flags); return 0; }@@ -80,7 +82,8 @@ static int sam9x60_pll_prepare(struct clk_hw *hw) regmap_write(regmap, AT91_PMC_PLL_ACR, val); regmap_write(regmap, AT91_PMC_PLL_CTRL1, - FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul)); + FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul) | + FIELD_PREP(PMC_PLL_CTRL1_FRACR_MSK, pll->frac)); if (pll->characteristics->upll) { /* Enable the UTMI internal bandgap */-- 2.7.4
-- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel