On Wed, 15 Jul 2020 17:03:39 +0800, Yifeng Zhao wrote:

Documentation support for Rockchip RK3xxx NAND flash controllers

Signed-off-by: Yifeng Zhao <redacted>
---

Changes in v7:
- Fix some wrong define

Changes in v6:
- Fix some wrong define
- Modified the definition of compatible

Changes in v5:
- Fix some wrong define.
- Add boot-medium define.
- Remove some compatible define.

Changes in v4:
- The compatible define with rkxx_nfc.
- Add assigned-clocks.
- Fix some wrong defineChanges in.

Changes in v3:
- Change the title for the dt-bindings.

Changes in v2: None

 .../mtd/rockchip,nand-controller.yaml         | 162 ++++++++++++++++++
 1 file changed, 162 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.example.dt.yaml: example-0: nand-controller@ff4b0000:reg:0: [0, 4283105280, 0, 16384] is too long


See https://patchwork.ozlabs.org/patch/1329325

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel