Re: [PATCH v3 1/9] dt-bindings: reset: Add a binding for the RPi Firmware reset controller
From: Rob Herring <robh@kernel.org>
Date: 2020-07-13 18:24:02
Also in:
linux-devicetree, linux-pci, linux-usb, lkml
On Fri, Jun 12, 2020 at 07:13:25PM +0200, Nicolas Saenz Julienne wrote:
quoted hunk ↗ jump to hunk
The firmware running on the RPi VideoCore can be used to reset and initialize HW controlled by the firmware. Signed-off-by: Nicolas Saenz Julienne <redacted> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- Changes since v2: - Add include file for reset IDs Changes since v1: - Correct cells binding as per Florian's comment - Change compatible string to be more generic .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.hdiff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index b48ed875eb8e..23a885af3a28 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml@@ -39,6 +39,22 @@ properties: - compatible - "#clock-cells" + reset:
I'm not really thrilled how this is evolving with a node per provider. There's no reason you can't just add #clock-cells and #reset-cells to the parent firmware node. I probably should have complained with the clocks node, but that's only pending for 5.9. The bigger issue is this stuff is just trickling in one bit at a time which gives no context for review. What's next? Is it really a mystery as to what functions the firmware provides? You don't have to have a driver in place for every function. Rob _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel