Hi,

But this regulator is only used for the eMMC there, which we apparently
don't have on the Cubieboard 7?

We do have eMMC present on Cubieboard 7 (both the versions of Cubieboard7), and
the regulator name is similar to what is used in
"s900-bubblegum-96.dts" .i.e. "vcc_3v1".

But Since this patch doesn't enable eMMC, it does make sense to remove this
"vcc_3v1" regulator and keep the other one.

quoted

Also, another day tested it without having these regulators in , and
still it seems to
work.  So should these be removed ?

If there are not even referenced in the .dts, then fixed regulators are
rather pointless. So yes, please remove this vcc-3v1 one.

Sure, I would do this.

What is the story with the other regulator? Is there a PMIC or a power
switch for the SD card? Or is the power supply actually hardwired?

SD_VCC is connected to SWITCH/LDO which gets input from ATM2603C PMIC.
This seems to be enabled by default ( in early bootloaders I guess).

Thanks
-Amit.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel