---
  drivers/thermal/mtk_thermal.c | 114 ++++++++++++++++++----------------
  1 file changed, 62 insertions(+), 52 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 76e30603d4d5..10107d9d56a8 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c

@@ -120,18 +120,18 @@
   * MT2701 has 3 sensors and needs 3 VTS calibration data.
   * MT2712 has 4 sensors and needs 4 VTS calibration data.
   */
-#define CALIB_BUF0_VALID		BIT(0)
-#define CALIB_BUF1_ADC_GE(x)		(((x) >> 22) & 0x3ff)
-#define CALIB_BUF0_VTS_TS1(x)		(((x) >> 17) & 0x1ff)
-#define CALIB_BUF0_VTS_TS2(x)		(((x) >> 8) & 0x1ff)
-#define CALIB_BUF1_VTS_TS3(x)		(((x) >> 0) & 0x1ff)
-#define CALIB_BUF2_VTS_TS4(x)		(((x) >> 23) & 0x1ff)
-#define CALIB_BUF2_VTS_TS5(x)		(((x) >> 5) & 0x1ff)
-#define CALIB_BUF2_VTS_TSABB(x)		(((x) >> 14) & 0x1ff)
-#define CALIB_BUF0_DEGC_CALI(x)		(((x) >> 1) & 0x3f)
-#define CALIB_BUF0_O_SLOPE(x)		(((x) >> 26) & 0x3f)
-#define CALIB_BUF0_O_SLOPE_SIGN(x)	(((x) >> 7) & 0x1)
-#define CALIB_BUF1_ID(x)		(((x) >> 9) & 0x1)
+#define CALIB_BUF0_VALID_V1		BIT(0)
+#define CALIB_BUF1_ADC_GE_V1(x)		(((x) >> 22) & 0x3ff)
+#define CALIB_BUF0_VTS_TS1_V1(x)	(((x) >> 17) & 0x1ff)
+#define CALIB_BUF0_VTS_TS2_V1(x)	(((x) >> 8) & 0x1ff)
+#define CALIB_BUF1_VTS_TS3_V1(x)	(((x) >> 0) & 0x1ff)
+#define CALIB_BUF2_VTS_TS4_V1(x)	(((x) >> 23) & 0x1ff)
+#define CALIB_BUF2_VTS_TS5_V1(x)	(((x) >> 5) & 0x1ff)
+#define CALIB_BUF2_VTS_TSABB_V1(x)	(((x) >> 14) & 0x1ff)
+#define CALIB_BUF0_DEGC_CALI_V1(x)	(((x) >> 1) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V1(x)	(((x) >> 26) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x)	(((x) >> 7) & 0x1)
+#define CALIB_BUF1_ID_V1(x)		(((x) >> 9) & 0x1)
  
  enum {
  	VTS1,

@@ -525,7 +525,7 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
   * This converts the raw ADC value to mcelsius using the SoC specific
   * calibration constants
   */
-static int raw_to_mcelsius(struct mtk_thermal *mt, int sensno, s32 raw)
+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
  {
  	s32 tmp;
  

@@ -594,9 +594,9 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
  		raw = readl(mt->thermal_base +
  			    conf->msr[conf->bank_data[bank->id].sensors[i]]);
  
-		temp = raw_to_mcelsius(mt,
-				       conf->bank_data[bank->id].sensors[i],
-				       raw);
+		temp = raw_to_mcelsius_v1(mt,
+					  conf->bank_data[bank->id].sensors[i],
+					  raw);
  
  		/*
  		 * The first read of a sensor often contains very high bogus

@@ -758,6 +758,51 @@ static u64 of_get_phys_base(struct device_node *np)
  	return of_translate_address(np, regaddr_p);
  }
  
+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
+{
+	int i;
+
+	if (!(buf[0] & CALIB_BUF0_VALID_V1))
+		return -EINVAL;
+
+	mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
+
+	for (i = 0; i < mt->conf->num_sensors; i++) {
+		switch (mt->conf->vts_index[i]) {
+		case VTS1:
+			mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
+			break;
+		case VTS2:
+			mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
+			break;
+		case VTS3:
+			mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
+			break;
+		case VTS4:
+			mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
+			break;
+		case VTS5:
+			mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
+			break;
+		case VTSABB:
+			mt->vts[VTSABB] =
+				CALIB_BUF2_VTS_TSABB_V1(buf[2]);
+			break;
+		default:
+			break;
+		}
+	}
+
+	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
+	if (CALIB_BUF1_ID_V1(buf[1]) &
+	    CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
+		mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
+	else
+		mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
+
+	return 0;
+}
+
  static int mtk_thermal_get_calibration_data(struct device *dev,
  					    struct mtk_thermal *mt)
  {

@@ -793,43 +838,8 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
  		goto out;
  	}
  
-	if (buf[0] & CALIB_BUF0_VALID) {
-		mt->adc_ge = CALIB_BUF1_ADC_GE(buf[1]);
-
-		for (i = 0; i < mt->conf->num_sensors; i++) {
-			switch (mt->conf->vts_index[i]) {
-			case VTS1:
-				mt->vts[VTS1] = CALIB_BUF0_VTS_TS1(buf[0]);
-				break;
-			case VTS2:
-				mt->vts[VTS2] = CALIB_BUF0_VTS_TS2(buf[0]);
-				break;
-			case VTS3:
-				mt->vts[VTS3] = CALIB_BUF1_VTS_TS3(buf[1]);
-				break;
-			case VTS4:
-				mt->vts[VTS4] = CALIB_BUF2_VTS_TS4(buf[2]);
-				break;
-			case VTS5:
-				mt->vts[VTS5] = CALIB_BUF2_VTS_TS5(buf[2]);
-				break;
-			case VTSABB:
-				mt->vts[VTSABB] = CALIB_BUF2_VTS_TSABB(buf[2]);
-				break;
-			default:
-				break;
-			}
-		}
-
-		mt->degc_cali = CALIB_BUF0_DEGC_CALI(buf[0]);
-		if (CALIB_BUF1_ID(buf[1]) &
-		    CALIB_BUF0_O_SLOPE_SIGN(buf[0]))
-			mt->o_slope = -CALIB_BUF0_O_SLOPE(buf[0]);
-		else
-			mt->o_slope = CALIB_BUF0_O_SLOPE(buf[0]);
-	} else {
+	if (mtk_thermal_extract_efuse_v1(mt, buf))
  		dev_info(dev, "Device not calibrated, using default calibration values\n");
-	}
  
  out:
  	kfree(buf);