Thread (3 messages) 3 messages, 2 authors, 2020-07-04

RE: [PATCH v2] serial: samsung: Re-factors UART IRQ resource for various Samsung SoC

From: M Tamseel Shams <hidden>
Date: 2020-07-04 14:26:12
Also in: linux-samsung-soc, linux-serial, lkml

On Sun, Jun 28, 2020 at 12:30:07PM +0530, Tamseel Shams wrote:
quoted
In few older Samsung SoCs like s3c2410, s3c2412 and s3c2440, UART IP
is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210, exynos5433, and
exynos4210 UART is having only 1 interrupt line. Due to this,
"platform_get_irq(platdev, 1)"
call in the driver gives the following warning:
"IRQ index 1 not found" on recent platforms.

This patch re-factors the IRQ resources handling for each platform and
hence fixing the above warnings seen on some platforms.

Signed-off-by: Tamseel Shams <redacted>
---
Removed the RFC tag and using 'platform_get_irq_optional'
instead of 'platform_get_irq' as per comment received from Robin
Murphy.

 drivers/tty/serial/samsung_tty.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c
b/drivers/tty/serial/samsung_tty.c
index 6ef614d8648c..60554f42e208 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -60,6 +60,7 @@ struct s3c24xx_uart_info {
 	char			*name;
 	unsigned int		type;
 	unsigned int		fifosize;
+	unsigned int		irq_cnt;
No, it's duplicating the logic.

The driver already checks whether SoC has two or one interrupt line with
s3c24xx_serial_has_interrupt_mask() so there is no point to have two of such
methods.

Instead unify it please. Probably entire
s3c24xx_serial_has_interrupt_mask() and s3c24xx_serial_type() should be
removed and switched into *serial_drv_data.

Best regards,
Krzysztof
Hi Krzysztof,
Thanks for letting me know about duplication of logic.
I will remove my logic of checking of number of interrupt line
and replace it with check using s3c24xx_serial_has_interrupt_mask().

I will come up with another patch regarding the suggestion of removal 
of the two functions s3c24xx_serial_has_interrupt_mask() and 
s3c24xx_serial_type() and moving it to *serial_drv_data.

Thanks & Regards,
Tamseel


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help