[PATCH v6 04/10] iommu/mediatek: Setting MISC_CTRL register
From: Chao Hao <hidden>
Date: 2020-07-03 04:43:22
Also in:
linux-devicetree, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
Add F_MMU_IN_ORDER_WR_EN_MASK and F_MMU_STANDARD_AXI_MODE_EN_MASK definitions in MISC_CTRL register. F_MMU_STANDARD_AXI_MODE_EN_MASK: If we set F_MMU_STANDARD_AXI_MODE_EN_MASK (bit[3][19] = 0, not follow standard AXI protocol), the iommu will priorize sending of urgent read command over a normal read command. This improves the performance. F_MMU_IN_ORDER_WR_EN_MASK: If we set F_MMU_IN_ORDER_WR_EN_MASK (bit[1][17] = 0, out-of-order write), the iommu will re-order write commands and send the write commands with higher priority. Otherwise the sending of write commands will be done in order. The feature is controlled by OUT_ORDER_WR_EN platform data flag. Cc: Matthias Brugger <matthias.bgg@gmail.com> Suggested-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Chao Hao <redacted> --- drivers/iommu/mtk_iommu.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 40ca564d97af..219d7aa6f059 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -42,6 +42,9 @@ #define F_INVLD_EN1 BIT(1) #define REG_MMU_MISC_CTRL 0x048 +#define F_MMU_IN_ORDER_WR_EN_MASK (BIT(1) | BIT(17)) +#define F_MMU_STANDARD_AXI_MODE_MASK (BIT(3) | BIT(19)) + #define REG_MMU_DCM_DIS 0x050 #define REG_MMU_CTRL_REG 0x110
@@ -105,6 +108,7 @@ #define HAS_BCLK BIT(1) #define HAS_VLD_PA_RNG BIT(2) #define RESET_AXI BIT(3) +#define OUT_ORDER_WR_EN BIT(4) #define MTK_IOMMU_HAS_FLAG(pdata, _x) \ ((((pdata)->flags) & (_x)) == (_x))
@@ -585,8 +589,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data) if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) { /* The register is called STANDARD_AXI_MODE in this case */ - writel_relaxed(0, data->base + REG_MMU_MISC_CTRL); + regval = 0; + } else { + regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL); + regval &= ~F_MMU_STANDARD_AXI_MODE_MASK; + if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_WR_EN)) + regval &= ~F_MMU_IN_ORDER_WR_EN_MASK; } + writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL); if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0, dev_name(data->dev), (void *)data)) {
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel