Thread (15 messages) 15 messages, 7 authors, 2021-01-18

Re: [PATCH v4 0/2] pinctrl: single: support #pinctrl-cells = 2

From: Tony Lindgren <tony@atomide.com>
Date: 2020-07-02 17:37:03
Also in: linux-devicetree, linux-gpio, linux-omap, lkml

* Drew Fustini [off-list ref] [200701 01:34]:
Currently, pinctrl-single only allows #pinctrl-cells = 1.

This series will allow pinctrl-single to also support #pinctrl-cells = 2

If "pinctrl-single,pins" has 3 arguments (offset, conf, mux) then
pcs_parse_one_pinctrl_entry() does an OR operation on conf and mux to
get the value to store in the register.
    
To take advantage of #pinctrl-cells = 2, the AM33XX_PADCONF macro in
omap.h is modified to keep pin conf and pin mux values separate.

change log:
- v4: squash patches 2 and 3 together so that git biesct will not result
  in a boot failure
Thanks for updating it. Best that Linus queues both patches via
the pinctrl tree when no more comments:

Acked-by: Tony Lindgren <tony@atomide.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help