Re: [PATCH 1/2] usb: gadget: introduce flag for large request

Some USB hardware like DMA engine can help to process (split) the data
of each URB request into small packets. For example, the max packet size
of high speed is 512 bytes. These kinds of hardware can help to split
the continue Tx/Rx data requests into packets just at the max packet
size during transmission. Hence upper layer software can reduce some
effort for queueing many requests back and forth for larger data.

Here we introduce "can_exceed_maxp" flag in gadget when these kinds of
hardware is ready to support these operations.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
 drivers/usb/mtu3/mtu3_qmu.c |   11 ++++++++++-
 include/linux/usb/gadget.h  |    1 +
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c
index 3f414f9..2b51a20 100644
--- a/drivers/usb/mtu3/mtu3_qmu.c
+++ b/drivers/usb/mtu3/mtu3_qmu.c

@@ -620,7 +620,7 @@ irqreturn_t mtu3_qmu_isr(struct mtu3 *mtu)
 
 int mtu3_qmu_init(struct mtu3 *mtu)
 {
-
+	int i;
 	compiletime_assert(QMU_GPD_SIZE == 16, "QMU_GPD size SHOULD be 16B");
 
 	mtu->qmu_gpd_pool = dma_pool_create("QMU_GPD", mtu->dev,

@@ -629,10 +629,19 @@ int mtu3_qmu_init(struct mtu3 *mtu)
 	if (!mtu->qmu_gpd_pool)
 		return -ENOMEM;
 
+	/* Let gadget know we can process request larger than max packet */
+	for (i = 1; i < mtu->num_eps; i++)
+		mtu->ep_array[i].ep.can_exceed_maxp = 1;
+
 	return 0;
 }
 
 void mtu3_qmu_exit(struct mtu3 *mtu)
 {
+	int i;
 	dma_pool_destroy(mtu->qmu_gpd_pool);
+
+	/* Disable large request support */
+	for (i = 1; i < mtu->num_eps; i++)
+		mtu->ep_array[i].ep.can_exceed_maxp = 0;
 }

diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 6a17817..60e0645 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h

@@ -236,6 +236,7 @@ struct usb_ep {
 	unsigned		max_streams:16;
 	unsigned		mult:2;
 	unsigned		maxburst:5;
+	unsigned		can_exceed_maxp:1;