[PATCH 1/3] ARM: dts: change AM33XX_PADCONF macro separate conf and mux
From: Drew Fustini <hidden>
Date: 2020-06-18 12:51:50
Also in:
linux-devicetree, linux-gpio, linux-omap, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
AM33XX_PADCONF macro is modified to keep pin conf and pin mux separate. This requires #pinctrl-cells = 2 in am33xx-l4.dtsi pinctrl-single.c but also be changed to support "pinctrl-single,pins" with 3 arguments (offset, conf, mux) Signed-off-by: Drew Fustini <redacted> --- include/dt-bindings/pinctrl/omap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 625718042413..a0974923bb1b 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h@@ -65,7 +65,7 @@ #define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) #define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) #define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) -#define AM33XX_PADCONF(pa, dir, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) ((dir) | (mux)) +#define AM33XX_PADCONF(pa, conf, mux) (OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux)) /* * Macros to allow using the offset from the padconf physical address
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel