Thread (1 message) 1 message, 1 author, 2020-06-18
STALE2265d REVIEWED: 7 (6M)

2 review trailers (1 from subsystem maintainers).

[PATCH AUTOSEL 5.4 175/266] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link

From: Sasha Levin <sashal@kernel.org>
Date: 2020-06-18 02:16:21
Also in: linux-amlogic, linux-pci, lkml, stable
Subsystem: pci native host bridge and endpoint drivers, pci subsystem, pcie driver for amlogic meson, the rest · Maintainers: Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Yue Wang, Linus Torvalds

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]

The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).

According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:

"Sets all internal timers to fast mode for simulation purposes."

it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.

Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.

Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org (local)
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <redacted>
Reviewed-by: Neil Armstrong <redacted>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-meson.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index b927a92e3463..8c9f88704874 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -301,11 +301,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp)
 	meson_cfg_writel(mp, val, PCIE_CFG0);
 
 	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
-	val &= ~LINK_CAPABLE_MASK;
+	val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE);
 	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
 
 	val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
-	val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
+	val |= LINK_CAPABLE_X1;
 	meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
 
 	val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help