[PATCH 3/4] spi: bcm63xx-hsspi: add reset support
From: Álvaro Fernández Rojas <hidden>
Date: 2020-06-15 08:03:36
Also in:
linux-spi, lkml
Subsystem:
broadcom broadband soc high speed spi controller driver, spi subsystem, the rest · Maintainers:
William Zhang, Kursad Oney, Jonas Gorski, Mark Brown, Linus Torvalds
bcm63xx arch resets the HSSPI controller at early boot. However, bmips arch needs to perform a reset when probing the driver. Signed-off-by: Álvaro Fernández Rojas <redacted> --- drivers/spi/spi-bcm63xx-hsspi.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 6c235306c0e4..a20a0b88c23a 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c@@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/mutex.h> #include <linux/of.h> +#include <linux/reset.h> #define HSSPI_GLOBAL_CTRL_REG 0x0 #define GLOBAL_CTRL_CS_POLARITY_SHIFT 0
@@ -334,6 +335,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) struct clk *clk, *pll_clk = NULL; int irq, ret; u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS; + struct reset_control *reset; irq = platform_get_irq(pdev, 0); if (irq < 0)
@@ -348,10 +350,25 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); + reset = devm_reset_control_get(dev, NULL); + if (IS_ERR(reset)) { + ret = PTR_ERR(reset); + if (ret != -EPROBE_DEFER) + dev_err(dev, + "failed to get reset controller: %d\n", ret); + return ret; + } + ret = clk_prepare_enable(clk); if (ret) return ret; + ret = reset_control_reset(reset); + if (ret) { + dev_err(dev, "unable to reset device: %d\n", ret); + goto out_disable_clk; + } + rate = clk_get_rate(clk); if (!rate) { pll_clk = devm_clk_get(dev, "pll");
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel