[PATCH v4 17/27] clk: bcm: rpi: Split pllb clock hooks
From: Maxime Ripard <hidden>
Date: 2020-06-11 07:32:57
Also in:
linux-clk, lkml
Subsystem:
common clk framework, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Linus Torvalds
The driver only supports the pllb for now and all the clock framework hooks are a mix of the generic firmware interface and the specifics of the pllb. Since we will support more clocks in the future let's split the generic and specific hooks Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Nicolas Saenz Julienne <redacted> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <redacted> --- drivers/clk/bcm/clk-raspberrypi.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 58ac1b104429..19571602ba64 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c@@ -102,8 +102,8 @@ static int raspberrypi_fw_is_prepared(struct clk_hw *hw) } -static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, + unsigned long parent_rate) { struct raspberrypi_clk_data *data = container_of(hw, struct raspberrypi_clk_data, hw);
@@ -116,21 +116,27 @@ static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, if (ret) return ret; - return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + return val; } -static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) +static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return raspberrypi_fw_get_rate(hw, parent_rate) * + RPI_FIRMWARE_PLLB_ARM_DIV_RATE; +} + +static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { struct raspberrypi_clk_data *data = container_of(hw, struct raspberrypi_clk_data, hw); struct raspberrypi_clk *rpi = data->rpi; - u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + u32 _rate = rate; int ret; ret = raspberrypi_clock_property(rpi->firmware, data, - RPI_FIRMWARE_SET_CLOCK_RATE, - &new_rate); + RPI_FIRMWARE_SET_CLOCK_RATE, &_rate); if (ret) dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d", clk_hw_get_name(hw), ret);
@@ -138,6 +144,14 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, return ret; } +static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + + return raspberrypi_fw_set_rate(hw, new_rate, parent_rate); +} + /* * Sadly there is no firmware rate rounding interface. We borrowed it from * clk-bcm2835.
--
git-series 0.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel