[PATCHv2 2/6] power: supply: gpio-charger: Make gpios optional
From: Sebastian Reichel <hidden>
Date: 2020-06-05 22:44:19
Also in:
linux-devicetree, linux-pm, lkml
Subsystem:
open firmware and flattened device tree bindings, power supply class/subsystem and drivers, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sebastian Reichel, Linus Torvalds
While strongly recommended, not all devices have a gpio to detect if the charger is connected. This moves the 'gpios' from required to optional section. This also modifies error handling for the GPIO a bit: We no longer fallback to pdata, if a GPIO is specified using GPIO descriptor tables. This is a bit cleaner and does not have any real impact: There are only two mainline pdata users (arm/mach-sa1100/collie.c, arm/mach-pxa/tosa.c) and none of them specify the GPIO via gpiod descriptor tables. Once both have been converted the driver's support for specifying GPIOs numbers in pdata will be dropped. Signed-off-by: Sebastian Reichel <redacted> --- .../bindings/power/supply/gpio-charger.yaml | 7 +++- drivers/power/supply/gpio-charger.c | 38 ++++++++++++------- 2 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
index 78b167c62ab1..30eabbb14ef3 100644
--- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml@@ -41,7 +41,12 @@ properties: required: - compatible - - gpios + +anyOf: + - required: + - gpios + - required: + - charge-status-gpios additionalProperties: false
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 1b959c7f8b0e..875735d50716 100644
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c@@ -112,9 +112,14 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id, return irq; } +/* + * The entries will be overwritten by driver's probe routine depending + * on the available features. This list ensures, that the array is big + * enough for all optional features. + */ static enum power_supply_property gpio_charger_properties[] = { POWER_SUPPLY_PROP_ONLINE, - POWER_SUPPLY_PROP_STATUS /* Must always be last in the array. */ + POWER_SUPPLY_PROP_STATUS, }; static int gpio_charger_probe(struct platform_device *pdev)
@@ -128,6 +133,7 @@ static int gpio_charger_probe(struct platform_device *pdev) int charge_status_irq; unsigned long flags; int ret; + int num_props = 0; if (!pdata && !dev->of_node) { dev_err(dev, "No platform data\n");
@@ -142,13 +148,13 @@ static int gpio_charger_probe(struct platform_device *pdev) * This will fetch a GPIO descriptor from device tree, ACPI or * boardfile descriptor tables. It's good to try this first. */ - gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN); + gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN); /* - * If this fails and we're not using device tree, try the - * legacy platform data method. + * Fallback to legacy platform data method, if no GPIO is specified + * using boardfile descriptor tables. */ - if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) { + if (!gpio_charger->gpiod && pdata) { /* Non-DT: use legacy GPIO numbers */ if (!gpio_is_valid(pdata->gpio)) { dev_err(dev, "Invalid gpio pin in pdata\n");
@@ -173,17 +179,23 @@ static int gpio_charger_probe(struct platform_device *pdev) return PTR_ERR(gpio_charger->gpiod); } + if (gpio_charger->gpiod) { + gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE; + num_props++; + } + charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN); - gpio_charger->charge_status = charge_status; - if (IS_ERR(gpio_charger->charge_status)) - return PTR_ERR(gpio_charger->charge_status); + if (IS_ERR(charge_status)) + return PTR_ERR(charge_status); + if (charge_status) { + gpio_charger->charge_status = charge_status; + gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS; + num_props++; + } charger_desc = &gpio_charger->charger_desc; charger_desc->properties = gpio_charger_properties; - charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties); - /* Remove POWER_SUPPLY_PROP_STATUS from the supported properties. */ - if (!gpio_charger->charge_status) - charger_desc->num_properties -= 1; + charger_desc->num_properties = num_props; charger_desc->get_property = gpio_charger_get_property; psy_cfg.of_node = dev->of_node;
@@ -269,6 +281,6 @@ static struct platform_driver gpio_charger_driver = { module_platform_driver(gpio_charger_driver); MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); -MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO"); +MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:gpio-charger");
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel