Thread (2 messages) 2 messages, 1 author, 2020-05-28
STALE2197d

[PATCH 2/2] ARM: dts: Change WDOG_ANY signal from push-pull to open-drain

From: Schrempf Frieder <hidden>
Date: 2020-05-28 14:43:49
Also in: linux-devicetree, lkml, stable
Subsystem: the rest · Maintainer: Linus Torvalds

From: Frieder Schrempf <redacted>

The WDOG_ANY signal is connected to the RESET_IN signal of the SoM
and baseboard. It is currently configured as push-pull, which means
that if some external device like a programmer wants to assert the
RESET_IN signal by pulling it to ground, it drives against the high
level WDOG_ANY output of the SoC.

To fix this we set the WDOG_ANY signal to open-drain configuration.
That way we make sure that the RESET_IN can be asserted by the
watchdog as well as by external devices.

Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Cc: stable@vger.kernel.org
Signed-off-by: Frieder Schrempf <redacted>
---
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index fc316408721d..61ba21a605a8 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -116,7 +116,7 @@
 
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x30b0
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
 		>;
 	};
 };
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help