Hi Stephen,

From: Dong Aisheng <aisheng.dong@nxp.com>
Sent: Sunday, March 15, 2020 9:44 PM

This patch series is a preparation for the MX8 Architecture improvement.
As for IMX SCU based platforms like MX8QM and MX8QXP, they are comprised
of a couple of SS(Subsystems) while most of them within the same SS can be
shared. e.g. Clocks, Devices and etc.

However, current clock binding is using SW IDs for device tree to use which can
cause troubles in writing the common <soc>-ss-xx.dtsi file for different SoCs.

This patch series aims to introduce a new binding which is more close to
hardware and platform independent and can makes us write a more general
drivers for different SCU based SoCs.

Another important thing is that on MX8, each Clock resource is associated with
a power domain. So we have to attach that clock device to the power domain in
order to make it work properly. Further more, the clock state will be lost when
its power domain is completely off during suspend/resume, so we also introduce
the clock state save&restore mechanism.

It's based on latest shanw/for-next branch.

The top commit is:
4559a11e48d5 Merge branch 'imx/defconfig' into for-next

I carefully went through all your review comments on V4 [1] and i'm sure all of them have been addressed.
And for the V5-Resend version [2] , we didn't receive your comment.
It seems Shawn is also waiting for your feedback for the next step.
Could you help check V6?

For V6, only a minor update that added scu clk unregister if met error. As the original code does not support it,
so i added an extra patch to handle it.

[1] https://lore.kernel.org/linux-clk/AM0PR04MB421181E4376070636898906F80A10@AM0PR04MB4211.eurprd04.prod.outlook.com/t/ (local)
[2] https://patchwork.kernel.org/cover/11248249/

Regards
Aisheng

ChangeLog:
v5->v6:
 * add scu clk unregister if add provider failed
v4->v5:
 * Address all comments from Stephen
v3->v4:
 * use clk-indices for LPCG to fetch each clks offset from dt
v2->v3:
 * change scu clk into two cells binding
 * add clk pm patches to ease the understand of the changes
v1->v2:
 * SCU clock changed to one cell clock binding inspired by arm,scpi.txt
   Documentation/devicetree/bindings/arm/arm,scpi.txt
 * Add required power domain property
 * Dropped PATCH 3&4 first, will send the updated version accordingly
   after the binding is finally determined,


Dong Aisheng (12):
  dt-bindings: firmware: imx-scu: new binding to parse clocks from
    device tree
  dt-bindings: clock: imx-lpcg: add support to parse clocks from device
    tree
  clk: imx: scu: add two cells binding support
  clk: imx: scu: bypass cpu power domains
  clk: imx: scu: allow scu clk to take device pointer
  clk: imx: scu: add runtime pm support
  clk: imx: scu: add suspend/resume support
  clk: imx: imx8qxp-lpcg: add parsing clocks from device tree
  clk: imx: lpcg: allow lpcg clk to take device pointer
  clk: imx: clk-imx8qxp-lpcg: add runtime pm support
  clk: imx: lpcg: add suspend/resume support
  clk: imx: scu: unregister clocks if add provider failed

 .../bindings/arm/freescale/fsl,scu.txt        |  12 +-
 .../bindings/clock/imx8qxp-lpcg.txt           |  36 ++-
 drivers/clk/imx/clk-imx8qxp-lpcg.c            | 139 +++++++++++
 drivers/clk/imx/clk-imx8qxp.c                 | 136 ++++++-----
 drivers/clk/imx/clk-lpcg-scu.c                |  53 +++-
 drivers/clk/imx/clk-scu.c                     | 231 +++++++++++++++++-
 drivers/clk/imx/clk-scu.h                     |  56 ++++-
 include/dt-bindings/clock/imx8-lpcg.h         |  14 ++
 include/dt-bindings/firmware/imx/rsrc.h       |  23 ++
 9 files changed, 610 insertions(+), 90 deletions(-)  create mode 100644
include/dt-bindings/clock/imx8-lpcg.h

--
2.23.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel