On Fri, 20 Mar 2020 14:45:24 +0100, Linus Walleij wrote:

This adds YAML device tree bindings for the Integrator/AP
logic modules. These are plug-in tiles used typically for
FPGA prototyping.

Cc: devicetree@vger.kernel.org
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <redacted>
---
ChangeLog v2->v3:
- Put proper ranges around the addresses managed by the
  LM bus, 0xc0000000-0xffffffff as
  <0xc0000000 0xc0000000 0x40000000>
- Put unit name on the first LM bus bus@c0000000 in the
  example in the bindings.
- Drop leading zeroes in the unit names of the devices
  in the example.
ChangeLog v1->v2:
- Fix Logical->Logic spelling error
- Set generic names for bus and serial
- Just map the addresses 1:1 and use empty ranges, as the
  LM's don't really translate the address.
- Provide proper DMA ranges: the LM modules see the RAM at
  the system-wide alias @80000000 rather than 1:1.
- Drop the reg from the bus node (we just need the ranges)
- Make the regexp for the bus node such that @address is
  optional, as we don't require any reg on the node
---
 .../bindings/bus/arm,integrator-ap-lm.yaml    | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel