[PATCH RFC 4/6] arm64: dts: armada-cp11x: add pwm support to GPIO blocks
From: Russell King <hidden>
Date: 2020-03-29 10:49:09
Also in:
linux-devicetree, linux-gpio, linux-pwm
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Add PWM support to the GPIO blocks. Signed-off-by: Russell King <redacted> --- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 024073edfc1c..dfd251acc194 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi@@ -311,6 +311,7 @@ ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; interrupt-controller; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
@@ -319,6 +320,8 @@ <83 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; status = "disabled"; + clock-names = "core"; + clocks = <&CP11X_LABEL(clk) 1 21>; }; CP11X_LABEL(gpio2): gpio@140 {
@@ -327,6 +330,7 @@ ngpios = <31>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; interrupt-controller; interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
@@ -335,6 +339,8 @@ <79 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; status = "disabled"; + clock-names = "core"; + clocks = <&CP11X_LABEL(clk) 1 21>; }; };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel