Hi, Adam

Subject: i.MX8MN Errors on 5.6-RC7

I am getting a few errors on the i.MX8MN:

[    0.000368] Failed to get clock for /timer@306a0000
[    0.000380] Failed to initialize '/timer@306a0000': -22
[    7.203447] caam 30900000.caam: Failed to get clk 'ipg': -2
[    7.334741] caam 30900000.caam: Failed to request all necessary clocks
[    7.438651] caam: probe of 30900000.caam failed with error -2
[    7.854193] imx-cpufreq-dt: probe of imx-cpufreq-dt failed with error -2

I was curious to know if anyone else is seeing similar errors.  I already
submitted a proposed fix for a DMA timeout (not shown here) which
matched work already done on i.MX8MQ and i.MX8MM.

I am not seeing huge differences between 8MM and 8MN in the nodes which
address the timer, caam or imx-cpufreq-dt.

If anyone has any suggestions, I'd love to try them.

Which board did you try? I just run it on i.MX8MN-EVK board, no such failure:

root@imx8mnevk:~# uname -a
Linux imx8mnevk 5.6.0-rc7 #621 SMP PREEMPT Sat Mar 28 19:56:30 CST 2020 aarch64 aarch64 aarch64 GNU/Linux
root@imx8mnevk:~# dmesg | grep fail
[    0.719353] imx-sdma 302b0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.941304] calling  net_failover_init+0x0/0x8 @ 1
[    0.941310] initcall net_failover_init+0x0/0x8 returned 0 after 0 usecs
[    1.135885] calling  failover_init+0x0/0x24 @ 1
[    1.135897] initcall failover_init+0x0/0x24 returned 0 after 6 usecs
root@imx8mnevk:~#

Thanks,
Anson
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel