On Tue, 24 Mar 2020 15:18:15 -0500, Suman Anna wrote:

The Texas Instruments K3 family of SoCs have one or more dual-core
Arm Cortex R5F processor subsystems/clusters (R5FSS). The clusters
can be split between multiple voltage domains as well. Add the device
tree bindings document for these R5F subsystem devices. These R5F
processors do not have an MMU, and so require fixed memory carveout
regions matching the firmware image addresses. The nodes require more
than one memory region, with the first memory region used for DMA
allocations at runtime. The remaining memory regions are reserved
and are used for the loading and running of the R5F remote processors.
The R5F processors can also optionally use any internal on-chip SRAM
memories either for executing code or using it as fast-access data.

The added example illustrates the DT nodes for the single R5FSS device
present on K3 AM65x family of SoCs.

Signed-off-by: Suman Anna <redacted>
---
Hi Rob,

The dt_bindings_check seems to throw couple of warnings around the
usage of ranges because the tooling is adding the #address-cells
and #size-cells of 1 by default, whereas our actual code uses 2.
No issues are found with dtbs_check.

regards
Suman

 .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  | 338 ++++++++++++++++++
 1 file changed, 338 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dts:23.13-20: Warning (ranges_format): /example-0/reserved-memory:ranges: empty "ranges" property but its #address-cells (2) differs from /example-0 (1)
Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dts:23.13-20: Warning (ranges_format): /example-0/reserved-memory:ranges: empty "ranges" property but its #size-cells (2) differs from /example-0 (1)
Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dts:54.13-56.72: Warning (ranges_format): /example-0/interconnect@100000:ranges: "ranges" property has invalid length (72 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dt.yaml: interconnect@100000: $nodename:0: 'interconnect@100000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dt.yaml: interconnect@28380000: $nodename:0: 'interconnect@28380000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dt.yaml: mcu-ram@41c00000: 'r5f-sram@0' does not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.example.dt.yaml: mcu-ram@41c00000: $nodename:0: 'mcu-ram@41c00000' does not match '^sram(@.*)?'

See https://patchwork.ozlabs.org/patch/1260966

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel