[PATCH v5 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream
From: Nicolas Saenz Julienne <hidden>
Date: 2020-03-10 12:53:21
Also in:
linux-pci, linux-usb, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The property is needed in order to trigger VL805's firmware load. Note that there is a gap between the property introduced and the previous one. This is also the case downstream. Signed-off-by: Nicolas Saenz Julienne <redacted> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- include/soc/bcm2835/raspberrypi-firmware.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 7800e12ee042..cc9cdbc66403 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h@@ -90,7 +90,7 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, - + RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058, /* Dispmanx TAGS */ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel