Re: [PATCH V4 2/4] mailbox: imx: restructure code to make easy for new MU
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2020-03-03 06:47:26
Also in:
lkml
On 03.03.20 07:27, Peng Fan wrote:
Hi Oleksij,quoted
Subject: Re: [PATCH V4 2/4] mailbox: imx: restructure code to make easy for new MU On 03.03.20 02:52, peng.fan@nxp.com wrote:quoted
From: Peng Fan <peng.fan@nxp.com> Add imx_mu_generic_tx for data send and imx_mu_generic_rx for interrupt data receive. Pack original mu chans related code into imx_mu_init_generic With these, it will be a bit easy to introduce i.MX8/8X SCU type MU dedicated to communicate with SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- V4: Pack MU chans init to imx_mu_init_generic V3: New patch, restructure code. drivers/mailbox/imx-mailbox.c | 127++++++++++++++++++++++++++----------------quoted
1 file changed, 78 insertions(+), 49 deletions(-)diff --git a/drivers/mailbox/imx-mailbox.cb/drivers/mailbox/imx-mailbox.c index 2cdcdc5f1119..e98f3550f995 100644--- a/drivers/mailbox/imx-mailbox.c +++ b/drivers/mailbox/imx-mailbox.c@@ -36,7 +36,12 @@ enum imx_mu_chan_type { IMX_MU_TYPE_RXDB, /* Rx doorbell */ }; +struct imx_mu_priv; +struct imx_mu_con_priv;Please move imx_mu_dcfg below struct imx_mu_priv. It was my mistaked, i missed this point.That's fine.quoted
quoted
struct imx_mu_dcfg { + int (*tx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp, void*data);quoted
+ int (*rx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp);please add init function here as well.ok. I'll add as below: int (*init)(struct imx_mu_priv *priv);quoted
quoted
u32 xTR[4]; /* Transmit Registers */ u32 xRR[4]; /* Receive Registers */ u32 xSR; /* Status Register */[....]quoted
quoted
- priv->side_b = of_property_read_bool(np, "fsl,mu-side-b"); + imx_mu_init_generic(priv);please use priv->dcfg->init(priv);I assume you agree the code I packed in imx_mu_init_generic.
yes
I just need to assign init = imx_mu_init_generic; And use priv->dcfg->init(priv), right?
right.
Thanks, Peng.quoted
quoted
+ spin_lock_init(&priv->xcr_lock); priv->mbox.dev = dev; priv->mbox.ops = &imx_mu_ops; priv->mbox.chans = priv->mbox_chans; - priv->mbox.num_chans = IMX_MU_CHANS; - priv->mbox.of_xlate = imx_mu_xlate; priv->mbox.txdone_irq = true; platform_set_drvdata(pdev, priv); - imx_mu_init_generic(priv); - return devm_mbox_controller_register(dev, &priv->mbox); }@@ -367,6 +378,24 @@ static int imx_mu_remove(struct platform_device*pdev)quoted
return 0; } +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = { + .tx = imx_mu_generic_tx, + .rx = imx_mu_generic_rx, + .xTR = {0x0, 0x4, 0x8, 0xc}, + .xRR = {0x10, 0x14, 0x18, 0x1c}, + .xSR = 0x20, + .xCR = 0x24, +}; + +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = { + .tx = imx_mu_generic_tx, + .rx = imx_mu_generic_rx, + .xTR = {0x20, 0x24, 0x28, 0x2c}, + .xRR = {0x40, 0x44, 0x48, 0x4c}, + .xSR = 0x60, + .xCR = 0x64, +}; + static const struct of_device_id imx_mu_dt_ids[] = { { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp }, { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },Kind regards, Oleksij Rempel -- Pengutronix e.K. | | Industrial Linux Solutions | https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.p engutronix.de%2F&data=02%7C01%7Cpeng.fan%40nxp.com%7Ce59c2b ea2efd47dc8fb408d7bf39f68c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C 0%7C0%7C637188127988825530&sdata=d%2FN82zkoGy7m3yXf6Q8h9 OWYs0ldZlozDzPwAnOMDkI%3D&reserved=0 | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Kind regards, Oleksij Rempel -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel