From: Sean Paul <redacted>

Currently the cursor is placed on the first overlay plane, which means
it will be at the bottom of the stack when the hw does the compositing
with anything other than primary plane. Since mtk doesn't support plane
zpos, change the cursor location to the top-most plane.

Signed-off-by: Evan Benn <evanbenn@chromium.org>
Signed-off-by: Sean Paul <redacted>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 29 +++++++++++++++++--------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 7b392d6c71cc..d4078c2089e0 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c

@@ -658,10 +658,21 @@ static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
 
 static int mtk_drm_crtc_init(struct drm_device *drm,
 			     struct mtk_drm_crtc *mtk_crtc,
-			     struct drm_plane *primary,
-			     struct drm_plane *cursor, unsigned int pipe)
+			     unsigned int pipe)
 {
-	int ret;
+	int i, ret;
+
+	struct drm_plane *primary = NULL;
+	struct drm_plane *cursor = NULL;
+
+	for (i = 0; i < mtk_crtc->layer_nr; ++i) {
+		if (!primary && mtk_crtc->planes[i].type ==
+				DRM_PLANE_TYPE_PRIMARY)
+			primary = &mtk_crtc->planes[i];
+		if (!cursor && mtk_crtc->planes[i].type ==
+				DRM_PLANE_TYPE_CURSOR)
+			cursor = &mtk_crtc->planes[i];
+	}
 
 	ret = drm_crtc_init_with_planes(drm, &mtk_crtc->base, primary, cursor,
 					&mtk_crtc_funcs, NULL);

@@ -711,11 +722,12 @@ static int mtk_drm_crtc_num_comp_planes(struct mtk_drm_crtc *mtk_crtc,
 }
 
 static inline
-enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx)
+enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx,
+					    unsigned int num_planes)
 {
 	if (plane_idx == 0)
 		return DRM_PLANE_TYPE_PRIMARY;
-	else if (plane_idx == 1)
+	else if (plane_idx == (num_planes - 1))
 		return DRM_PLANE_TYPE_CURSOR;
 	else
 		return DRM_PLANE_TYPE_OVERLAY;

@@ -734,7 +746,8 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
 		ret = mtk_plane_init(drm_dev,
 				&mtk_crtc->planes[mtk_crtc->layer_nr],
 				BIT(pipe),
-				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
+				mtk_drm_crtc_plane_type(mtk_crtc->layer_nr,
+							num_planes),
 				mtk_ddp_comp_supported_rotations(comp));
 		if (ret)
 			return ret;

@@ -830,9 +843,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			return ret;
 	}
 
-	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
-				mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
-				NULL, pipe);
+	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, pipe);
 	if (ret < 0)
 		return ret;