Neil Armstrong [off-list ref] writes:

When high load on the DWC3 SuperSpeed port, the controller crashes with:
[  221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[  221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[  221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
[  221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[  221.165946] usb 2-1.1-port1: cannot reset (err = -22)

Setting the parkmode_disable_ss_quirk quirk fixes the issue.

CC: Dongjin Kim <redacted>
Cc: Jianxin Pan <redacted>
Reported-by: Tim <redacted>
Signed-off-by: Neil Armstrong <redacted>

With the bindings reviewed/acked, I'll queue this DT patch for v5.7.
The binding and driver patches will need to go via the USB tree.

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel