[PATCH v2 11/13] dt-bindings: ipmi: Convert IPMI-SMIC bindings to json-schema
From: Andre Przywara <andre.przywara@arm.com>
Date: 2020-02-27 18:24:45
Also in:
linux-devicetree, lkml
Subsystem:
ipmi subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Corey Minyard, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Convert the generic IPMI controller bindings to DT schema format using json-schema. I removed the formerly mandatory device-type property, since this is deprecated in the DT spec, except for the legacy CPU and memory nodes. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Cc: Corey Minyard <redacted> Cc: openipmi-developer@lists.sourceforge.net --- .../devicetree/bindings/ipmi/ipmi-smic.txt | 25 --------- .../devicetree/bindings/ipmi/ipmi-smic.yaml | 56 +++++++++++++++++++ 2 files changed, 56 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.txt create mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
deleted file mode 100644
index d5f1a877ed3e..000000000000
--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt
+++ /dev/null@@ -1,25 +0,0 @@ -IPMI device - -Required properties: -- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt -- device_type: should be ipmi -- reg: Address and length of the register set for the device - -Optional properties: -- interrupts: The interrupt for the device. Without this the interface - is polled. -- reg-size - The size of the register. Defaults to 1 -- reg-spacing - The number of bytes between register starts. Defaults to 1 -- reg-shift - The amount to shift the registers to the right to get the data - into bit zero. - -Example: - -smic@fff3a000 { - compatible = "ipmi-smic"; - device_type = "ipmi"; - reg = <0xfff3a000 0x1000>; - interrupts = <0 24 4>; - reg-size = <4>; - reg-spacing = <4>; -};
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
new file mode 100644
index 000000000000..c859e0e959b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml@@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IPMI device bindings + +description: IPMI device bindings + +maintainers: + - Corey Minyard <cminyard@mvista.com> + +properties: + compatible: + enum: + - ipmi-kcs + - ipmi-smic + - ipmi-bt + + reg: + maxItems: 1 + + interrupts: + description: Interface is polled if this property is omitted. + maxItems: 1 + + reg-size: + description: The access width of the register in bytes. Defaults to 1. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 2, 4, 8] + + reg-spacing: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The number of bytes between register starts. Defaults to 1. + + reg-shift: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The amount of bits to shift the register content to the right to get + the data into bit zero. + +required: + - compatible + - reg + +examples: + - | + smic@fff3a000 { + compatible = "ipmi-smic"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; + };
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel