'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.

Signed-off-by: Anson Huang <redacted>
---
  drivers/clk/imx/clk-imx8mn.c | 8 ++++----
  1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 83618af..0bc7070 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c

@@ -428,7 +428,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
  	hws[IMX8MN_CLK_GPU_SHADER_DIV] = hws[IMX8MN_CLK_GPU_SHADER];
  
  	/* CORE SEL */
-	hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels), CLK_IS_CRITICAL);
+	hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels));
  
  	/* BUS */
  	hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);

@@ -559,15 +559,15 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
  
  	hws[IMX8MN_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
  
-	clk_hw_set_parent(hws[IMX8MN_CLK_A53_SRC], hws[IMX8MN_SYS_PLL1_800M]);
-	clk_hw_set_parent(hws[IMX8MN_CLK_A53_CORE], hws[IMX8MN_ARM_PLL_OUT]);