Re: [PATCH v2] irqchip/bcm2835: Quiesce IRQs left enabled by bootloader
From: Stefan Wahren <hidden>
Date: 2020-02-23 18:00:30
Also in:
lkml
Hi Lukas, Am 12.02.20 um 13:36 schrieb Lukas Wunner:
On Tue, Feb 11, 2020 at 08:47:05PM -0800, Florian Fainelli wrote:quoted
The commit message is a bit long and starts going into details that I am not sure add anythingI adhere to the school of thought which holds that commit messages shall provide complete context, including numbers to back up claims, user-visible impact, affected versions, genesis of the fix and so on. By that logic there's no such a thing as a too long commit message. Nevertheless please find a shortened version below, complete with the Fixes tag you requested as well as your R-b. On Wed, Feb 12, 2020 at 08:13:29AM +0000, Marc Zyngier wrote:quoted
It otherwise looks good. You can either resend it with a fixed commit message, or provide me with a commit message that I can stick there while applying it.The below also contains the patch itself, so can be applied directly with git am --scissors. Feel free to tweak as you see fit. Shout if I've missed anything. Thanks.
thanks for all the investigation. Unfortunately the patch below doesn't compile, since it lacks the definiton of REG_FIQ_ENABLE. Btw the name is a little bit unlucky because it defines a single flag within REG_FIQ_CONTROL instead of a separate register. Regards Stefan
quoted hunk
-- >8 -- From: Lukas Wunner <lukas@wunner.de> Subject: [PATCH] irqchip/bcm2835: Quiesce IRQs left enabled by bootloader Per the spec, the BCM2835's IRQs are all disabled when coming out of power-on reset. Its IRQ driver assumes that's still the case when the kernel boots and does not perform any initialization of the registers. However the Raspberry Pi Foundation's bootloader leaves the USB interrupt enabled when handing over control to the kernel. Quiesce IRQs and the FIQ if they were left enabled and log a message to let users know that they should update the bootloader once a fixed version is released. If the USB interrupt is not quiesced and the USB driver later on claims the FIQ (as it does on the Raspberry Pi Foundation's downstream kernel), interrupt latency for all other peripherals increases and occasional lockups occur. That's because both the FIQ and the normal USB interrupt fire simultaneously. On a multicore Raspberry Pi, if normal interrupts are routed to CPU 0 and the FIQ to CPU 1 (hardcoded in the Foundation's kernel), then a USB interrupt causes CPU 0 to spin in bcm2836_chained_handle_irq() until the FIQ on CPU 1 has cleared it. Other peripherals' interrupts are starved as long. I've seen CPU 0 blocked for up to 2.9 msec. eMMC throughput on a Compute Module 3 irregularly dips to 23.0 MB/s without this commit but remains relatively constant at 23.5 MB/s with this commit. The lockups occur when CPU 0 receives a USB interrupt while holding a lock which CPU 1 is trying to acquire while the FIQ is temporarily disabled on CPU 1. At best users get RCU CPU stall warnings, but most of the time the system just freezes. Fixes: 89214f009c1d ("ARM: bcm2835: add interrupt controller driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v3.7+ Cc: Serge Schneider <redacted> Cc: Kristina Brooks <redacted> --- drivers/irqchip/irq-bcm2835.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c index 418245d..eca9ac7 100644 --- a/drivers/irqchip/irq-bcm2835.c +++ b/drivers/irqchip/irq-bcm2835.c@@ -135,6 +135,7 @@ static int __init armctrl_of_init(struct device_node *node, { void __iomem *base; int irq, b, i; + u32 reg; base = of_iomap(node, 0); if (!base)@@ -157,6 +158,19 @@ static int __init armctrl_of_init(struct device_node *node, handle_level_irq); irq_set_probe(irq); } + + reg = readl_relaxed(intc.enable[b]); + if (reg) { + writel_relaxed(reg, intc.disable[b]); + pr_err(FW_BUG "Bootloader left irq enabled: " + "bank %d irq %*pbl\n", b, IRQS_PER_BANK, ®); + } + } + + reg = readl_relaxed(base + REG_FIQ_CONTROL); + if (reg & REG_FIQ_ENABLE) { + writel_relaxed(0, base + REG_FIQ_CONTROL); + pr_err(FW_BUG "Bootloader left fiq enabled\n"); } if (is_2836) {
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel