On 20/01/2020 14:10:00+0200, Claudiu Beznea wrote:

Hi,

This series adds fixes and improvements for SAM9X60 as follows:
- fix master clock register offset in pm_suspend.S
- add support for disable/enable PLL for SAM9X60
- minor fix in pm_suspend.S: s/sfr/sfrbu
- move SAM9X60's macros for PLL in include/linux/clk/at91_pmc.h

Thank you,
Claudiu Beznea

Claudiu Beznea (8):
  ARM: at91: pm: use proper master clock register offset
  Revert "ARM: at91: pm: do not disable/enable PLLA for ULP modes"
  ARM: at91: pm: add macros for plla disable/enable
  ARM: at91: pm: add pmc_version member to at91_pm_data
  ARM: at91: pm: s/sfr/sfrbu in pm_suspend.S
  clk: at91: move sam9x60's PLL register offsets to PMC header
  ARM: at91: pm: add plla disable/enable support for sam9x60
  ARM: at91: pm: add quirk for sam9x60's ulp1

 arch/arm/mach-at91/pm.c              |  35 ++++++-
 arch/arm/mach-at91/pm.h              |   2 +
 arch/arm/mach-at91/pm_data-offsets.c |   4 +
 arch/arm/mach-at91/pm_suspend.S      | 189 ++++++++++++++++++++++++++++++++---
 drivers/clk/at91/clk-sam9x60-pll.c   |  91 +++++++----------
 include/linux/clk/at91_pmc.h         |  23 +++++
 6 files changed, 270 insertions(+), 74 deletions(-)

Applied, thanks.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel