Thread (19 messages) 19 messages, 6 authors, 2020-02-22

[PATCH v4 2/6] PCI: rcar: Fix calculating mask for PCIEPAMR register

STALE2414d

From: Lad Prabhakar <prabhakar.csengg@gmail.com>
Date: 2020-02-08 18:36:59
Also in: linux-devicetree, linux-pci, linux-renesas-soc, linux-rockchip, lkml
Subsystem: pci driver for renesas r-car, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers: Marek Vasut, Yoshihiro Shimoda, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds

Revision v4 of 2 in this series.

Revisions (2)
  1. v4 current
  2. v5 [diff vs current]
The mask value was calculated incorrectly for PCIEPAMR register if the
size was less the 128bytes, this patch fixes the above by adding a check
on size.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pci/controller/pcie-rcar.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index d5568db..c76a92a 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -71,7 +71,7 @@ void rcar_pcie_set_outbound(int win, void __iomem *base,
 	/* Setup PCIe address space mappings for each resource */
 	resource_size_t res_start;
 	resource_size_t size;
-	u32 mask;
+	u32 mask = 0x0;
 
 	rcar_pci_write_reg(base, 0x00000000, PCIEPTCTLR(win));
 
@@ -80,7 +80,8 @@ void rcar_pcie_set_outbound(int win, void __iomem *base,
 	 * keeps things pretty simple.
 	 */
 	size = resource_size(res);
-	mask = (roundup_pow_of_two(size) / SZ_128) - 1;
+	if (size > 128)
+		mask = (roundup_pow_of_two(size) / SZ_128) - 1;
 	rcar_pci_write_reg(base, mask << 7, PCIEPAMR(win));
 
 	if (!host) {
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help