[PATCH v1 10/12] arm64: dts: librem5-devkit: configure VSELECT
From: Martin Kepplinger <hidden>
Date: 2020-02-05 14:31:26
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: "Angus Ainslie (Purism)" <redacted> use vselect to set the io voltage to 1.8V Signed-off-by: Angus Ainslie (Purism) <redacted> --- arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index fbc7062c4633..8f920c554ebd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts@@ -789,6 +789,7 @@ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 >; };
@@ -800,6 +801,7 @@ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 >; };
@@ -811,6 +813,7 @@ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 >; };
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel