[PATCH] FIXUP! ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes
From: Andre Przywara <andre.przywara@arm.com>
Date: 2020-01-06 14:02:13
Subsystem:
the rest · Maintainer:
Linus Torvalds
The DMA controller is not in the mainline DT, so remove the broken reference from the SPI controller to that node. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reported-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun8i-r40.dtsi | 8 -------- 1 file changed, 8 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 06d579f6d44b..8f09a24b36ec 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi@@ -660,8 +660,6 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; - dmas = <&dma 24>, <&dma 24>; - dma-names = "rx", "tx"; resets = <&ccu RST_BUS_SPI0>; status = "disabled"; #address-cells = <1>;
@@ -675,8 +673,6 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; - dmas = <&dma 25>, <&dma 25>; - dma-names = "rx", "tx"; resets = <&ccu RST_BUS_SPI1>; status = "disabled"; #address-cells = <1>;
@@ -690,8 +686,6 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; - dmas = <&dma 26>, <&dma 26>; - dma-names = "rx", "tx"; resets = <&ccu RST_BUS_SPI2>; status = "disabled"; #address-cells = <1>;
@@ -705,8 +699,6 @@ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; - dmas = <&dma 27>, <&dma 27>; - dma-names = "rx", "tx"; resets = <&ccu RST_BUS_SPI3>; status = "disabled"; #address-cells = <1>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel